So, when I bought a whole bunch of eyelet trim for the farthingale, I thought I had enough. Nowhere near. So I went out to buy another 15 metres or so.
Well, I couldn't find it at the local Fabricland, nor the nearest three, nor the huge one on Ottawa street. It turns out they've discontinued it! And, moreover, the company that makes it has been acquired by another, and they don't really exist anymore!
I happened to get the one employee from the old company on the phone, and she knew what I was talking about, and found me some old stock buried in the warehouse somewhere. I had to buy a lot of it, though.
It's just my luck that the trim I base a whole article of clothing on goes discontinued just in time for all stock to run out at the time I've discovered I need more.
Monday, April 9, 2012
Thursday, March 29, 2012
An Underbust Corset
I was quite inspired by the new corset pattern by King and Company. I decided that I wanted to make up a quick underbust to add to a basic deep green satin dress to make an old-fashioned Snow White costume for halloween. Guess what didn't happen?
Friday, February 17, 2012
Fathingcoat! Pettigale?
So a long time ago I decided to create one of the undergarments for the Tudor Gown. It would need a farthingale to make the skirt stand out straight. It would then need a petticoat to hide the steels. I had a brainstorm. A combination farthingale-petticoat: a farthingale with rows of ruffles sewn right onto it. And I began. I spoke about the scads and scads of ruffles previously.
I had an idea that I would need to get proper steel for it, but I did not like the thought. I figured, maybe if I get the cheap plastic boning, but put a few rows right beside each other, they'll reinforce each other and be fine. Take note: this does not work. It makes more work for you, in fact, because then you have to painstakingly pick out the stitches for all those superfluous horizontal rows.
Anyway, I finally got them unpicked and I have some proper steels, and I have sewn the casings on (measured meticulously) and started to sew the flounces on.
It takes longer than I anticipated. Also, I have decided I need to make an actual skirt with three flounces at the bottom -- I kind of like the look of this.
I had an idea that I would need to get proper steel for it, but I did not like the thought. I figured, maybe if I get the cheap plastic boning, but put a few rows right beside each other, they'll reinforce each other and be fine. Take note: this does not work. It makes more work for you, in fact, because then you have to painstakingly pick out the stitches for all those superfluous horizontal rows.
Anyway, I finally got them unpicked and I have some proper steels, and I have sewn the casings on (measured meticulously) and started to sew the flounces on.
It takes longer than I anticipated. Also, I have decided I need to make an actual skirt with three flounces at the bottom -- I kind of like the look of this.
Sunday, December 11, 2011
Ren Fair and Pirate Fair 2011
Well, the two festivals I've mentioned previously have come and gone. I did, in fact, complete one outfit to wear (and a slight variation so that it wasn't identical for both). The basic outfit was the skirt, the blouse, and the bodice. The Pirate Festival got a hitched-up overskirt and the Renaissance Faire got a white apron.
Labels:
Costume,
Finished,
Pirate Festival,
Ren Faire,
Wench
Tuesday, November 15, 2011
What have I been doing?
Well, the blog isn't abandoned, as much as it seems like it. I've had a change of career and it took a lot of my attention for quite some time. On top of that, in the last several months I've lost a lot of weight, which makes it rather heartbreaking to spend a lot of time on a costume if the end result is that it won't fit you in a month. Case in point below: my Arwen Evenstar dress.

Tuesday, June 28, 2011
Making a Spontaneous Flower Hair Wreath
Okay, today I ran across the holy grail of picturesque costuming skills: the ability to wander into a field and create a hair wreath from just the flowers you can pick there.
As Sempstress.org puts it:
So there’s always that scene in medieval movies where the heroine is seen romping around a field with a wreath of real live flowers on her head, and maybe there’s someone shown doing some totally random bit of jiggery-pokery that effortlessly causes flowers to form into a neat little chain...
It's brilliant. I'm going to go divest a field of some daisies now.
As Sempstress.org puts it:
So there’s always that scene in medieval movies where the heroine is seen romping around a field with a wreath of real live flowers on her head, and maybe there’s someone shown doing some totally random bit of jiggery-pokery that effortlessly causes flowers to form into a neat little chain...
It's brilliant. I'm going to go divest a field of some daisies now.
Sunday, May 29, 2011
More Ren Faire Bodice
Okay, so yesterday morning I had a mockup and nothing else. I hadn't even finished tracing the pattern with all the changes from the mockup.
Now I have...this!

All I have left to do is cut down a couple of the bones, make the bias binding, and finish the edges!
Now I have...this!
All I have left to do is cut down a couple of the bones, make the bias binding, and finish the edges!
Saturday, May 28, 2011
The Ren Fair Bodice Mockup
Okay, it's been awhile since I've posted. Which, unfortunately, means it's been awhile since I've done any sewing. This is unfortunate because the Ren Faire, which I mentioned in an earlier post, is in a week. I may have been a bit hopeful in thinking I'd make two different types of corsets for the two faires this summer, and I've decided to just do the underbust with straps as I have already sketched out. I've made a basic underbust before at a workshop, and I don't really have all the time I need to figure out fitting a totally new project.
The straps were the new part, so I figured it would be an easy thing to just trace the various pieces of the corset I already had, then add some straps. Yeah, not so easy. It's a lot harder than I thought to get the accurate tracing of what is essentially a 3-dimensional construct. I couldn't get the pieces to lie flat no matter what I did, so I ended up needing to make certain adjustments to the mockup.
The straps were not nearly as bad (although if my husband hadn't been so helpful with positioning them it would have been nigh-impossible. I'm very lucky he's willing to help me fit things).
My original corset had a front busk and a back lacing. This one is more of a boned bodice, and it will have just a front lacing. That required some alterations to the pattern as well, including making a shaped back seam.
Nonetheless, after all that finicky stuff, I had a mockup:
The straps were the new part, so I figured it would be an easy thing to just trace the various pieces of the corset I already had, then add some straps. Yeah, not so easy. It's a lot harder than I thought to get the accurate tracing of what is essentially a 3-dimensional construct. I couldn't get the pieces to lie flat no matter what I did, so I ended up needing to make certain adjustments to the mockup.
The straps were not nearly as bad (although if my husband hadn't been so helpful with positioning them it would have been nigh-impossible. I'm very lucky he's willing to help me fit things).
My original corset had a front busk and a back lacing. This one is more of a boned bodice, and it will have just a front lacing. That required some alterations to the pattern as well, including making a shaped back seam.
Nonetheless, after all that finicky stuff, I had a mockup:
Subscribe to:
Posts (Atom)







